Programmed Paper Cutting Machine with 10inch touch screen computer
High quality casting part made by resin bonded sand way.
Online Service
Tel:
+91 9815952520,
+91 9814052520
Email: fivestarmachines@yahoo.in
Introduction
Technical Parameters
Introduction
Introduction
High quality casting part made by resin bonded sand way.
Chrome-plated slot-less working table installed with double imported linear guide and air cushion.
With ball lead screw.
Mechanical assistance device for knife replacement.
Overload protection safety device.
Infrared photoelectric protection device.
Knife cutting only operated by pressing two buttons at same time.
Fluorescent lamp and cutting line indicator.
Ejective device for knife bar.
Use imported components in Hydraulic system.
Use imported electronic units like TOSHIBA, LG, Schneider, Fotek and Delta.
Delta PLC control.
Driven by Servo motor, the maximum speed of the back gauge is 30 m/min.
Use imported Mechanic components like NSK Bearing.
Adjust hydraulic pressure manually and the paper can be pressed twice by pressure-increased system.
High quality casting part made by resin bonded sand way.
Chrome-plated slot-less working table installed with double imported linear guide and air cushion.
With ball lead screw.
Mechanical assistance device for knife replacement.
Overload protection safety device.
Infrared photoelectric protection device.
Knife cutting only operated by pressing two buttons at same time.
Fluorescent lamp and cutting line indicator.
Ejective device for knife bar.
Use imported components in Hydraulic system.
Use imported electronic units like TOSHIBA, LG, Schneider, Fotek and Delta.
Delta PLC control.
Driven by Servo motor, the maximum speed of the back gauge is 30 m/min.
Use imported Mechanic components like NSK Bearing.
Adjust hydraulic pressure manually and the paper can be pressed twice by pressure-increased system.
Technical Parameters
| Model | 780 | 920 | 1150 | 1300 | 1370 | 1640 | 2000 | 2200 | 2600 | 4000 |
|---|---|---|---|---|---|---|---|---|---|---|
| Max. Feeding Paper Format | M | M | M | M | M | M | M | M | A | A |
| Min. Feeding Paper Format | 780 | 940 | 1150 | 1300 | 1370 | 1640 | 2000 | 2200 | 2600 | 4000 |
| Max. Die cutting Format | 780 | 940 | 1150 | 1300 | 1370 | 1600 | 1600 | 1600 | 2600 | 2600 |
| Max. Working Pressure | 115 | 120 | 160 | 130 | 160 | 160 | 160 | 160 | 120 | 120 |
| Paper Range | 610 | 610 | 700 | 700 | 700 | 700 | 700 | 700 | 700 | 700 |
| Die cutting Precision | 930 | 930 | 930 | 930 | 930 | 930 | 930 | 930 | 930 | 930 |
| Max. Speed | 3 | 3 | 5.5 | 4 | 5.5 | 5.5 | 7.5 | 7.5 | 7.5 | 11 |
| Max. Feeding Pile Height | 3000 | 3500 | 5000 | 5000 | 5000 | 5000 | 6500 | 6500 | 6500 | 6500 |
| Max. Delivery Pile Height | 42 | 42 | 42 | 42 | 42 | 42 | 42 | 42 | 32 | 32 |
| Main Motor Power Consumption | 2000 | 2300 | 3800 | 3500 | 4500 | 6500 | 9600 | 10600 | 12000 | 15000 |
| Total Power | 2200 | 2500 | 4000 | 3700 | 4700 | 6700 | 9900 | 10900 | 12300 | 15300 |
| Total Weight | 2×2.1×1.5 | 2.3×2.1×1.5 | 2.5×2.7×1.6 | 2.7×2.9×1.6 | 2.8×3.2×1.7 | 3×3.2×1.7 | 3.6×3.2×1.6 | 3.6×3.4×1.6 | 4×3.4×1.6 | 5×3.4×1.6 |
| Dimension (L×W×H) | 2.3×1.42×1.9 | 2.3×1.42×1.9 | 2.65×1.62×1.9 | 2.85×1.42×1.9 | 2.85×1.62×2 | 3.15×1.4×2 | 3.6×1.7×2.25 | 4×1.7×2.4 | 4.6×1.7×7 | 4.8×1.7×3 |